|
|
|
» |
Test devices
Fogra test devices form the basis for effective quality control in repro, printing and finishing. For further information, please click on the measuring device or e-mail the appropriate contact.
Test device for determining the resistance of UV curable layers to solvents Fogra-ACET*
Fogra ACET enables the user to easily and cost savingly forecast whether a UV curable layer is properly cured. With the results of this test in mind it is possible to take appropriate measures, e.g. increase the dose of UV radiation, to avoid costly complaints. [...]
Info-PDF - 
Arne Müller
Control devices for continuous stationery printing*
The regular checking of continuous stationery provides a measurement of quality
control. The Fogra control devices for continuous stationery printing set makes it possible to check pile and form quality reliably and quickly. [...]
Info-PDF - Helmut Wordel
Folding device Fogra-FI
The Fogra-FI is a device for the production of sample folds, particularly on paper. With the help of a subsequent tensile strength test on a tensile testing apparatus, the residual strength of the specifically folded sample can be determined. The residual tensile strength characterizes the strength of the fold, for example following the heat treatment ofpaper [drying in web offset]. The Fogra FI has been developed on the principle of the web folder of an offset press. [...]
Info-PDF - Arne Müller
Finger rub test device Fogra-FiWi*
The Fogra-FiWi is a handy test device for determining the rub resistance of an ink layer. It is able to reproducibly simulate the effect of touching the product with hands or fingers. [...]
Info-PDF - Ludwig Zins
Heat exhausting device Fogra-HEX
Laboratory tool for investigating the drying tendencies of papers subjected to thermal stress, formaldehyde release during thermal transfer printing [textile industry] or the amount of residual toluene in gravure printed products [with additional detector]. [...]
Info-PDF - Stephan Dietzel
Test device for determining the adhesion of varnish layers Fogra-LHT
The Fogra LHT enables the converter to check in advance, whether varnish layers have a sufficient adhesion on the print. With the results of this test in mind it is possible to take appropriate measures to avoid costly complaints. [...]
Info-PDF - Arne Müller
Fogra Perforation Measurement Device
The Fogra Perforation Measurement Device is a portable test device for the measurement of the tensile strength of perforated and unperforated paper samples.
Info-PDF - Arne Müller
Fogra rub off and carbonating test device Fogra-WIKAT*
The Fogra rub-off and carbonating test device enables the manufacturer to check in advance, whether printing ink is transfered to adjacent sheets during the converting step by rub-off and/or carbonating. The test can be easily performed and yields a result at once and without additional cost. With the result of this test in mind it is possible to take appropriate measures to avoid costly complaints. [...]
Info-PDF - Arne Müller
Fogra/USHIO-UV-Curing Tester
The simple way to quickly check the quality of UV curing in production. The tester offers a remedy for an automated process, that determines the curing result in a simple and unambiguous way.
Do you still have a question?
We would be happy to answer it! Call us and our switchboard will put you through to the right Fogra expert. We would be happy to provide you with a quotation without any obligation. You can also find the prices for devices marked* in the Fogra-Online-Shop [German language].
Fogra switchboard: Ms. Johanna Geiser, Tel. +49 89 43182-0
*Order via
Online shop
[German]
or contact your
Fogra partner.
©